Lexmark Optra C710 Setup Manual page 24

option card
Warning!
The hard disk and
adapter must be installed in
option 3 on the system board.
Attaching a
20
Hard disk option card
Hard disk
Two hard disk options are available from Lexmark:
If you have a hard disk already installed on a hard disk
adapter, continue with "Installing adapters" on page 22.
Otherwise, continue with "Attaching a hard disk".
Use your adapter card with a third-party hard disk that
hard disk meet the following criteria:
You need a number 2 Phillips screwdriver to attach the
hard disk to the adapter.
To install and attach the hard disk:
• A Hard Disk already installed on a hard disk
adapter.
• A Hard Disk Adapter for installing a user pur-
chased hard disk.
– 2.5-inch platter
– ATA-2 (IDE) interface
– Maximum thickness of 13 mm (.51 in.)
– 2.1GB minimum hard disk capacity
– 4GB maximum hard disk capacity
1
Align the connector pins on the end of hard disk
with the connector on back of the adapter card.