Lexmark Optra C710 Setup Manual page 25

(Hard Disk is
on this side)
2
Push the hard disk securely into the connector.
3
Turn the adapter card over and insert four screws
through the adapter card.
The illustration shows the outline of the hard disk
on the reverse side of the adapter card.
4
Gently tighten the screws to secure the hard disk
to the adapter card.
Use the table below
to locate your next step
Do you need to...
"Install an adapter" see page 22
"Install the EMI shield and rear cover" see page 28
Attaching a hard disk
21