Lexmark Optra C710 Setup Manual page 10

Note:
Do not remove the print
cartridges, transfer belt, or coating
roll from original packing material
until you are ready to use them.
Manuals
Power cord
Quick Reference sleeve
MarkVision CD
6
Identifying printer parts
6
Remove the orange tape and other packing
material from the exterior of the printer.
.
Use the table below
to locate your next step
See...
Step 2: "Install memory and network options" on page 7
Step 3: "Set up the optional drawer unit" on page 31
Step 4: "Install the optional duplex unit" on page 37
Step 5: "Position the printer" on page 47