Lexmark Optra C710 Setup Manual page 66

Warning!
Lift, shake, and
insert the print cartridge using
the handle only. To prevent dam-
age to the print cartridge, do not
handle the shutter covering the
photocondutor.
Photoconductor shutter
62
Install the print cartridges
Print cartridge handle
7
Remove the appropriate print cartridge from the
packing material.
Your print cartridge has a shutter to protect the pho-
toconductor. Do not move the shutter or touch the
photoconductor (glossy green surface under the
shutter), it may become scratched or damaged.
Do not leave the cartridge cover open longer than
necessary. If you expose the photoconductor to light
for more than 10 minutes it may become damaged.
Cover the cartridge if it will be exposed to light for
more than 10 minutes.
8
Remove the orange tabs and any packing material
or tape from the print cartridge.
There are two orange tabs, one on each side of
the print cartridge.
Pull the orange tabs away from the print car-
tridge to remove them.
9
Gently shake the print cartridge to distribute the
toner evenly.