Configure The Snmp Notification - TRENDnet TPE-3012LS User Manual

TRENDnet User's Guide

Configure the SNMP Notification

Management > SNMP > Trap Management
1. Log into your switch management page (see
on page 11).
2. Click on Management, click on SNMP, and click on Notification.
3. Review the settings.
Item Description
Address Type Notify recipients host address type.
Server Address IP address or the hostname of the SNMP trap recipients.
Specify SNMP notification version
•
SNMPv1: SNMP Version 1 notification.
Version
•
SNMPv2: SNMP Version 2 notification.
•
SNMPv3: SNMP Version 3 notification.
Notification Type
•
Trap: Send SNMP traps to the host.
Type
•
Inform: Send SNMP informs to the host.(version 1 have
no inform)
SNMP community/user name for notification. If version
Community/User
is SNMPv3 the name is user name, else is community
name.
© Copyright 2020 TRENDnet. All Rights Reserved.
"Access your switch management page"
SNMP notification packet security level, the security
level must less than or equal to the community/user
name
•
No Security: Specify that no packet authentication is
Security Level
performed.
•
Authentication: Specify that no packet authentication
without encryption is performed.
•
Authentication and Privacy: Specify that no packet
Recipients server UDP port number, if "use default"
Server Port
authentication with encryption is performed.
checked the value is 162, else user configure.
Specify the SNMP informs timeout, if "use default"
Timeout
checked the value is 15, else user configure.
Specify the SNMP informs retry count, if "use default"
Retry
checked the value is 3, else user configure.
TPE-3012LS / TPE-3018LS
164