Configure Dhcp Option 82 Circuit Id Settings - TRENDnet TPE-3012LS User Manual

TRENDnet User's Guide

Configure DHCP Option 82 Circuit ID settings

Security > DHCP Snooping > Option Property
1. Log into your switch management page (see
on page 11).
2. Click on Security, click on DHCP Snooping, and click on Option82 Circuit ID.
3. Click Add. Review the settings below.
Item Description
Select port from list to associate to CID entry. Only available
Port
on Add dialog.
Input VLAN ID to associate to circuit ID entry. VLAN ID is not
VLAN
mandatory. Only available on Add dialog.
Input String as circuit ID. Packets match port and VLAN will
Circuit ID
be inserted circuit ID.
© Copyright 2020 TRENDnet. All Rights Reserved.
"Access your switch management page"
4. Click Apply.
5. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
6. Click OK.
TPE-3012LS / TPE-3018LS
123