Table of Contents
Advertisement
TRENDnet User's Guide
Ping Watchdog
Diagnostics > Ping Watchdog
This section allows users to configure a connectivity test to remote host. If connectivity
is lost to the remote host, the switch will reboot automatically.
1. Log into your switch management page (see
on page 11).
2. Click on Diagnostics and click on Ping Watchdog.
3. In the table, select the port to configure for ping watchdog and click Edit.
4. Review the settings below.
Item
Description
Port
Displays the port or ports currently selected to configure for
ping watchdog.
Reboot
Checking the Enable option will automatically reboot the
Enable
switch on ping failure to the remote host.
Ping Host
Enter the IPv4 address of the remote host to ping.
Ping
Enter the time period between each ping send to the host in
Interval
minutes.
Retry
Enter the number of retries allowed if ping fails to the host.
Count
After the retry count is reached, the switch will automatically
reboot.
© Copyright 2020 TRENDnet. All Rights Reserved.
"Access your switch management
page"
5. Click Apply.
6. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
7. Click OK.
TPE-3012LS / TPE-3018LS
146
Advertisement
Table of Contents
