TRENDnet User's Guide
6. Click Apply.
7. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
8. Click OK.
© Copyright 2020 TRENDnet. All Rights Reserved.
Configure Queue Scheduling
QoS > General > Queue Scheduling
1. Log into your switch management page (see
on page 11).
2. Click on QoS, click on General, and click on Queue Scheduling.
3. Review the settings below.
Item
Description
Queue
Queue ID to configure.
Strict Priority
Set queue to strict priority type.
WRR
Set queue to Weight round robin type.
If the queue type is WRR, set the queue weight for the
Weight
queue.
WRR
Percentage of WRR queue bandwidth.
Bandwidth
TPE-3012LS / TPE-3018LS
"Access your switch management
page"
137