Configure Ip Source Guard Impv Binding - TRENDnet TPE-3012LS User Manual

TRENDnet User's Guide

Configure IP Source Guard IMPV Binding

Security > IP Source Guard > IMPV Binding
1. Log into your switch management page (see
on page 11).
2. Click on Security, click on IP Source Guard, and click on IMPV Binding.
3. Click Add and review the settings below.
Item Description
Port Select port from list of a binding entry.
VLAN Specify a VLAN ID of a binding entry.
Select matching mode of binding entry
• IP-MAC-Port-VLAN: packet must match IP
Binding
address、MAC address、Port and VLAN ID.
• IP-Port-VLAN: packet must match IP address or
subnet、Port and VLAN ID.
MAC Input MAC address. Only available on IP-MAC-
Address Port-VLAN mode.
Input IP address and mask. Mask only available
IP Address
on IP-MAC-Port mode.
© Copyright 2020 TRENDnet. All Rights Reserved.
"Access your switch management page"
4. Click Apply.
5. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
6. Click OK.
TPE-3012LS / TPE-3018LS
125