Traceroute; Copper Test - TRENDnet TPE-3012LS User Manual

TRENDnet User's Guide

Traceroute

Diagnostics > Traceroute
1. Log into your switch management page (see
on page 11).
2. Click on Diagnostics and click on Traceroute.
3. Review the settings below.
Item Description
Address Type Specify the address type to "Hostname"or "IPv4".
Server Specify the Hostname/IPv4 address for the host address for
Address traceroute.
Time to Live Specify the max hops of hosts for traceroute.
© Copyright 2020 TRENDnet. All Rights Reserved.
"Access your switch management page"

Copper Test

Diagnostics > Copper Test
1. Log into your switch management page (see
on page 11).
2. Click on Diagnostics and click on Copper Test.
3. Review the settings below.
Item Description
Port Specify the interface for the copper test.
Copper Test Result
Port The interface for the copper test.
The status of copper test. It include:
⚫
OK: Correctly terminated pair.
⚫
Short Cable: Shorted pair.
⚫
Open Cable: Open pair, no link partner.
⚫
Result Impedance Mismatch: Terminating impedance is not in
the reference range.
⚫
Line Drive:
Length Distance in meter from the port to the location on the cable
where the fault was discovered.
TPE-3012LS / TPE-3018LS
"Access your switch management page"
147