TRENDnet TPE-3012LS User Manual page 13

TRENDnet User's Guide
8. For the IP address information, configure the switch to match the requirements of
your network by entering the appropriate IP Address, Subnet Mask, and Default
Gateway settings, then click Next.
Note: You may need to modify the static IP address settings of your computer's network
adapter to IP address settings within your subnet to regain access to the switch.
© Copyright 2020 TRENDnet. All Rights Reserved.
9. Create a new administrator password for management access to the switch by
entering a new password in the fields provided, then click Next.
10. On the final setup wizard page, you can check the "Ignore the wizard next time"
option to prevent the setup wizard prompt from appearing at the next login to the web
management interface, then click Apply.
TPE-3012LS / TPE-3018LS
9