TRENDnet User's Guide
Fiber Module
Diagnostics > Fiber Module
1. Log into your switch management page (see
on page 11).
2. Click on Diagnostics and click on Fiber Module.
3. In the table, select the SFP slot/fiber module and click click Detail.
4. Review the settings below.
Item
Description
Port
Interface or port number.
Temperature
Internally measured transceiver temperature.
Voltage
Internally measured supply voltage.
Current
Measured TX bias current.
Output Power
Measured TX output power in milliwatts.
Input Power
Measured RX received power in milliwatts.
Transmitter
State of TX fault.
Fault
© Copyright 2020 TRENDnet. All Rights Reserved.
"Access your switch management
page"
OE Present
Indicate transceiver has achieved power up and data is
ready.
Loss of Signal
Loss of signal.
Refresh
Refresh the page.
Detail
The detail information on the specified port.
TPE-3012LS / TPE-3018LS
148