TRENDnet User's Guide
4. Click Apply.
5. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
6. Click OK.
© Copyright 2020 TRENDnet. All Rights Reserved.
Configure the SNMP Users
Management > SNMP > User
An SNMP group must be created first in order to assign SNMP users.
1. Log into your switch management page (see
on page 11).
2. Click on Management, click on SNMP, and click on User.
3. Click Add to a new SNMP user. Review the settings.
Item
Description
Specify the SNMP user name on the host that connects to the
User
SNMP agent. The max character is 30 characters.
Specify the SNMP group to which the SNMP user belongs.
Group
SNMP privilege mode
•
No Security : Specify that no packet authentication is
performed.
Security
Level
•
Authentication: Specify that no packet authentication without
encryption is performed.
•
Authentication and Privacy: Specify that no packet
authentication with encryption is performed.
Authentication
TPE-3012LS / TPE-3018LS
"Access your switch management
page"
160