Configure Acl Port Binding - TRENDnet TPE-3012LS User Manual

TRENDnet User's Guide
4. Click Apply.
5. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
6. Click OK.
© Copyright 2020 TRENDnet. All Rights Reserved.

Configure ACL Port Binding

ACL > ACL Binding
This section allows users to bind MAC or IPv4 ACLs to specific switch ports or link
aggregation groups.
1. Log into your switch management page (see
on page 11).
2. Click on ACL and click on ACL Binding.
3. Review the settings below.
Item Description
Port Display port entry ID.
MAC ACL Select mac ACL name from list to bind.
IPv4 ACL Select IPv4 ACL name from list to bind.
IPv6 ACL Select IPv6 ACL name from list to bind.
TPE-3012LS / TPE-3018LS
"Access your switch management page"
134