View Your Switch Port Status Information - TRENDnet TPE-3012LS User Manual

TRENDnet User's Guide

View your switch port status information

Status > Port > Statistics
You may want to view port statistics information, error disabled state, or bandwidth
utilization information per port.
1. Log into your switch management page (see
on page 11).
2. Click on Status and click on Port.
3. Review the settings.
•
Statistics – This section displays the statistics and frame type counters for each
switch port interface. Click the drop-down list to select which switch port to
view the current statistics, (ex: GE10 means Gigabit Ethernet port number 10).
You can filter which statistics to view by selecting All, Interface, Etherlike,
RMON. The Refresh Rate option allows you to select the interval that the
statistical data is updated. Click Clear to clear all statistics and reset the
counters.
© Copyright 2020 TRENDnet. All Rights Reserved.
"Access your switch management page"
•
Error Disabled –Ports or link aggregation groups can be configured to enter an
error disabled state based on an event such as a loop, broadcast flood,
multicast flood, etc. In error disabled state, a timer will be assigned to the port
or link aggregation in which it will not pass traffic until the timer has reached 0.
The reason the port was set to an error disabled state will also be displayed.
Once the issue of the event has been resolved, the port can also be manually
taken our of error disabled state in this section to function normally.
TPE-3012LS / TPE-3018LS
39