Configure Cos Mapping - TRENDnet TPE-3012LS User Manual

TRENDnet User's Guide
4. Click Apply.
5. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
6. Click OK.
© Copyright 2020 TRENDnet. All Rights Reserved.

Configure CoS Mapping

QoS > General > CoS Mapping
1. Log into your switch management page (see
on page 11).
2. Click on QoS, click on General, and click on CoS Mapping.
3. Review the settings below.
Item Description
CoS to Queue Mapping
CoS CoS value.
Queue Select queue id for the CoS value.
Queue to CoS Mapping
Queue Queue ID
CoS Select CoS value for the queue id.
TPE-3012LS / TPE-3018LS
"Access your switch management page"
138