Acl; Configure Mac Acl - TRENDnet TPE-3012LS User Manual

TRENDnet User's Guide

ACL

This section allows users to configure traffic access control lists and access control
policies/entries.

Configure MAC ACL

ACL > MAC ACL
This section allows users to configure access control lists filtered based on MAC address.
1. Log into your switch management page (see
on page 11).
2. Click on ACL and click on MAC ACL.
3. Review the settings below.
Item Description
ACL Name Input MAC ACL name.
ACL Name Display MAC ACL name.
Rule Display the number ACE rule of ACL.
Port Display the port list that bind this ACL.
© Copyright 2020 TRENDnet. All Rights Reserved.
"Access your switch management page"
4. Click Apply.
5. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
6. Click OK.
TPE-3012LS / TPE-3018LS
127