TRENDnet User's Guide
•
IPv4: If applying the policy to IPv4 traffic, enter the specific IPv4 and subnet
mask to apply the policy.
•
IPv6: If applying the policy to IPv6 traffic, enter the specific IPv6 address and
subnet mask to apply the policy.
© Copyright 2020 TRENDnet. All Rights Reserved.
7. After the policy has been created under the ACL, click on Security, click on
Management Access, and click on Management ACL. Check the ACL to activate and
click Active to activate the ACL.
8. Click Apply.
9. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
10. Click OK.
TPE-3012LS / TPE-3018LS
113