Table of Contents
Advertisement
TRENDnet User's Guide
Configure RADIUS network port settings
Security > Authentication Manager > Port Settings
This section will allow you to configure RADIUS network port settings.
1. Log into your switch management page (see
on page 11).
2. Click on Security, click on Authentication Manager, and click on Port Settings.
3. Select the port you would like to configure and click Edit. Review the settings. Click
Apply to save the settings.
•
Port: Displays the selected port(s).
•
Port Control:
o
Disabled: Disable authentication and allows clients network access.
o
Force Authorized: Port forces authorization and allows client network
access.
o
Force Unauthorized: Port prevents authorization and denies client
network access.
o
Auto: Authentication is required for clients to allow network access.
•
Reauthentication: Check Enabled to allow clients to attempt re-authentication
automatically after the reauthentication period has expired.
•
Max Hosts: Specify the max. number of hosts allowed. (Applies to multiple
authentication mode only)
© Copyright 2020 TRENDnet. All Rights Reserved.
"Access your switch management
page"
Common Timer
•
Reauthentication: Set the reauthentication interval in seconds to in which a
client will automatically attempt reauthentication.
•
Inactive: Set the idle timeout period in seconds to automatically de-
authenticate a client if no traffic is received and the client is idle.
•
Quiet: When a port is in locked state after authentication fails several times,
the host will be locked in quiet period. Only after the quiet period has expired,
the client will be able to reauthenticate.
802.1x Parameters
•
TX Period: Set the time period in seconds that the device will wait for a
response to an EAP (Extensible Authentication Protocol) request/identity frame
from the supplicant (client) before resending the request.
•
Supplicant Timeout: Set the time period allowed to receive a response from
the supplicant (client) in the authentication process.
•
Server Timeout: Set the time period allowed before EAP requests are resent to
the supplicant (client).
•
Max Requests: Set maximum allowed number of EAP requests sent.
TPE-3012LS / TPE-3018LS
107
Advertisement
Table of Contents
