Set Trusted Interfaces; Configure Binding Database - TRENDnet TPE-224WS User Manual

TRENDnet User's Guide

Set Trusted Interfaces

DHCP Snooping > Trusted Interfaces
This section allows you to set trusted port interfaces where DHCP servers can be
connected allows or denies DHCP server information to be received on those ports.
1. Log into your switch management page (see
on page 7).
2. Click on DHCP Snooping and click on Trusted Interfaces.
3. Next to each port, click the Trust drop-down list and select one of the following
options.
•
Disable: This parameter defines the port as untrusted for the DHCP Snooping
feature.
•
Enable: This parameter defines the port as trusted for the DHCP Snooping
feature.
Note: You can select the row labeled ALL to apply settings to all ports.
4. Click Save Settings to Flash (menu).
5. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
© Copyright 2014 TRENDnet. All Rights Reserved.
"Access your switch management page"

Configure Binding Database

DHCP Snooping > Binding Database
The Binding Database displays learned and statically assigned MAC
Address and IP Address information for each host on the local area
network. Dynamically assigned IP addresses from the DHCP server will automatically
populate the table on the Binding Database page as they are assigned by the server.
Statically assigned IP addresses are entered manually by entering the host's address
information and clicking on the Add button.
1. Log into your switch management page (see
on page 7).
2. Click on DHCP Snooping and click on Binding Database.
3. Review the settings. Click Add to add the database entry to the table.
• MAC Address - Enter the host's MAC Address.
• IP Address - Enter the static IP Address assigned to the host.
• VLAN - Enter the host's VLAN ID.
•
Port - Enter the port number where the host is connected.
•
Type - Because the IP Address being entered is static, you must select Static.
• Lease Time - Enter the time that IP address assignment is valid. The range is 10
to 4294967295 seconds.
TPE-224WS
"Access your switch management page"
75