Show Information About The Drive - YASKAWA GA800 Technical Reference

4.6 Keypad Operation
5.
Push or
• [ON]: Backlight is always ON
• [OFF]: Backlight turns OFF after set length of time.
6.
Push (Setup).
7.
Push .
8.
Push or
9.
When you are done changing the value, push
The procedure to set the backlight to turn OFF automatically is complete.
◆

Show Information about the Drive

The procedure in this section shows how to show the drive model, maximum applicable motor output (HD/ND), rated
output current (HD/ND), software version, and the serial number on the keypad.
1.
Push [Home] to show the HOME screen.
Note:
• The keypad will [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
210
to select [ON] or [OFF], then push
to select the digit, then push
, push [Back] to show [Home] on
.
or to change the value.
.
.
YASKAWA SIEPC71061737D GA800 Drive Technical Reference