4.6 Keypad Operation
3.
Push
or
4.
Push
or
5.
Push
or
6.
Push
or
The keypad will show the "End" message when the write process is complete.
◆
Check Modified Parameters
This procedure will show all parameters that are not at their default values. This is very useful when you replace a
drive. This lets you quickly access and re-edit changed parameters. When all parameters are at their default values,
the keypad will show "0 Parameters".
1.
Push
(Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If [Home] is not shown on
2.
Push
(Menu).
194
to select [Parameter Backup/Restore], then push
to select the item to delete, then push
to select [Erase (backup data of keypad)], then push
to select the data to delete, then push
, push
(Back) to show [Home] on
.
.
.
.
.
YASKAWA SIEPC71061737D GA800 Drive Technical Reference