Set Backlight To Automatically Turn Off - YASKAWA GA800 Technical Reference

6.
Push or
7.
When you complete changing the value, push
The procedure to set the sampling time is complete.
◆

Set Backlight to Automatically Turn OFF

You can set the backlight of the keypad screen to automatically turn OFF after a set length of time since the last key
operation on the keypad. The procedure in this section shows how to turn ON and turn OFF the backlight.
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
2.
Push (Menu).
3.
Push or
4.
Push or
YASKAWA SIEPC71061737D GA800 Drive Technical Reference
to select the digit, then push
, push (Back) to show [Home] on
to select [Diagnostic Tools], then push
to select [Backlight], then push
or to change the value.
.
.
.
.
4.6 Keypad Operation
209
4