Qfx10002 Installation Safety Guidelines; General Installation Safety Guidelines; Qfx10002 Chassis Lifting Guidelines - Juniper QFX10002 Hardware Manual

QFX10002 Switch Hardware Guide

QFX10002 Installation Safety Guidelines

90
"Connecting AC Power to a QFX10002" on page 100
b.
QFX10002 on page 102
Registering Products—Mandatory for Validating SLAs on page 106
c.
Initially configure Junos OS following the instructions in
4.
on page 106
Set the management options for the QFX10002 device by following:
5.
Connecting a QFX Series Device to a Management Console on page 99
a.
Connecting a QFX10002 to a Management Ethernet Device on page 98
b.
Observe the following guidelines before and during QFX10002 installation:
General Installation Safety Guidelines on page 90
QFX10002 Chassis Lifting Guidelines on page 90

General Installation Safety Guidelines

Before installing or moving the QFX10002, verify that the intended site meets the specified
power, environmental, and clearance requirements. See the following documentation:
QFX10002 Site Preparation Checklist on page 65
QFX10002 Clearance Requirements for Airflow and Hardware Maintenance on page 69
QFX10002 Rack Requirements on page 71
QFX10002 Cabinet Requirements on page 72
QFX10002 Environmental Requirements and Specifications on page 67
"QFX10002 AC Power Specifications" on page 56
on page 59

QFX10002 Chassis Lifting Guidelines

The weight of a fully-loaded QFX10002-72Q is approximately 68.6 lbs (31.1 kg) with AC
power supplies and 67.8 lbs (30.8 kg) with DC power supplies installed. The weight of
a QFX10002-36Q is 54 lbs (24.5 kg). (Observe the following guidelines for lifting and
moving a QFX10002:
CAUTION: If you are installing the QFX10002 above 60 in. (152.4 cm) from
the floor, remove the power supplies and fan modules before attempting to
install the switch. Unless you are using a mechanical lift, at least three people
are required to perform the rack or cabinet installation.
or Connecting DC Power to a
"Configuring a QFX10000"
or QFX10002 DC Power Specifications
Copyright © 2019, Juniper Networks, Inc.