Port Mapping; Figure 10: Use The First And Fourth Port In Each 6Xqsfp Cage To Channelize A; Table 9: Qfx10002-36Q Port Mapping - Juniper QFX10002 Hardware Manual

Table 9: QFX10002-36Q Port Mapping

4X10 Gigabit
Port Number Ethernet
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Copyright © 2019, Juniper Networks, Inc.
Figure 10: Use the First and Fourth Port in Each 6XQSFP Cage to Channelize a Port Group
Port 0
Port 3
Use every third port to create a port range for
40-Gigabit Channelization.

Port Mapping

Table 9 on page 31 shows the available combinations for the ports. Most 100-Gigabit
Ethernet transceiver ports are used as uplinks. On the QFX10002 device, the ports are
enabled by default and the default config adds the ports to the default VLAN.
4X10 Gigabit
Channelized 40 Gigabit
Port Group Ethernet
100 Gigabit
Ethernet 100 Gigabit Ethernet Disables
– –
0, 2
– –
– –
– –
3, 4
– –
6, 8
– –
– –
– –
9, 10
– –
12, 14
– –
Chapter 1: Overview
31