40-Gbps Channelization; Figure 13: All Ports Are 40-Gigabit Ethernet By Default; Figure 14: 100-Gigabit Ethernet Ports Are Indicated By A Black Line Underneath; Figure 15: 100-Gigabit Ethernet Port Disables Two Associated 40-Gigabit Ethernet Ports In The Port Group - Juniper QFX10002 Hardware Manual

QFX10002 Switch Hardware Guide
38

Figure 13: All Ports are 40-Gigabit Ethernet by Default

Figure 14: 100-Gigabit Ethernet Ports Are Indicated by a Black Line Underneath the Port
Figure 15: 100-Gigabit Ethernet Port Disables Two Associated 40-Gigabit Ethernet Ports
in the Port Group

40-Gbps Channelization

The 40-Gigabit Ethernet ports can operate independently or bundled with the next two
consecutive ports and channelized into twelve 10-Gigabit Ethernet ports as a port group.
Like 100-Gigabit channelization, only the first and fourth port in each 6XQSFP cage are
available to channelize a port group (see
configured using the
set chassis fpc pic port channel-speed
channelize the first switch port, use the
command.
Figure 16 on page 39). The port group must be
command. For example, to
set chassis fpc 0 pic 0 port 1 channel-speed 10g
Copyright © 2019, Juniper Networks, Inc.