Port Mapping; Figure 16: Use The First And Fourth Port In Each 6Xqsfp Cage To Channelize A; Table 14: Qfx10002-72Q Port Mapping - Juniper QFX10002 Hardware Manual

Table 14: QFX10002-72Q Port Mapping

4X10 Gigabit
Port Number Ethernet Port
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Copyright © 2019, Juniper Networks, Inc.
Figure 16: Use the First and Fourth Port in Each 6XQSFP Cage to Channelize a Port Group
Port 0
Port 3
Use every third port to create a port range for
40-Gigabit Channelization.

Port Mapping

Table 14 on page 39 shows the available combinations for the ports. Most 100-Gigabit
Ethernet transceiver ports are used as uplinks . On the QFX10002, the ports are enabled
by default and the default configuration adds the ports to the default VLAN.
4X10 Gigabit 40 Gigabit
Channelized Ethernet
Port Group (Default)
100 Gigabit
Ethernet 100 Gigabit Ethernet Disables
– –
0, 2
– –
– –
– –
3, 4
– –
6, 8
– –
– –
– –
9, 10
– –
12, 14
– –
Chapter 1: Overview
39