Polycom ATX Integrator's Guide
5 - 6
The ATX 200 table has four seats facing the displays. These seats are numbered
1 through 4, from left to right, as you are facing the displays.
Left Display
1
Figure 5-4
Location of Displays and Seats — ATX 200 System
As described in
Chapter 2,
where a conference participant is seated affects where and how they appear on the
displays at the far site. To ensure that the conference participants appear on the
displays, but do not appear on more than one display, you should place the chairs
at the proper locations at the table and mark those locations.
Cam-1
(B1)
Right Display
2
3
"Installing the Displays, Table, Cameras, and Chairs,"
Cam-2
(B2)
4
Polycom, Inc.