System Location - Polycom CX7000 series Administrator's Manual

Administrator's Guide for Polycom CX7000 Systems

System Location

14
Enter the Admin Password, and then enter it again to confirm it.
3
If the system signs in as a Domain Member, the admin password must
meet the password policy of the domain controller security settings.
You can customize the system language, date, and time settings.
Changing this setting causes the system to restart. Do not power the system off
until the restart is complete.
To customize location settings:
Click Options >
1
Click Advanced Settings.
2
Sign in using the administrator account appropriate to your sign-in
3
mode:
— Domain Member: local administrator or domain administrator
— Standalone: local administrator
Click Location.
4
Configure these settings:
5
Setting Description
Language Sets the language for the user interface. Changing this setting
causes the system to restart.
Time Format Specifies your format preference for the time display.
Time Zone Specifies the time zone for this location. Changing this setting causes
the system to restart.
Power Specifies the power line frequency for your system. In most cases,
Frequency the system defaults to the correct power line frequency, based on the
video standard used in the country where the system is located. This
setting allows you to adapt the system in areas where the power line
frequency does not match the video standard used. You may need to
change this setting to avoid flicker from the fluorescent lights in your
conference room.
Keyboard Specifies the type of keyboard in use with this system.
Layout
Configuration.
Polycom, Inc.