Preparing For The Camera Alignment In An Atx 300 Room; Figure 5-5 Telepresence Tool Camera Alignment Tab - Atx 200 System - Polycom ATX 200 Integrator Manual

Polycom ATX Integrator's Guide

Preparing for the Camera Alignment in an ATX 300 Room

5 - 8
Click the Camera Alignment tab.
4
The following illustration shows the Camera Alignment tab for an ATX
200 system.
Figure 5-5 Telepresence Tool Camera Alignment Tab — ATX 200 System
The ATX 300 system has three codecs, three displays, and three cameras. As
you are seated in the room facing the displays, the displays are designated
center, left, and right. Each camera is connected to a particular codec, and each
codec is connected to a particular display as described in the following table.
Polycom, Inc.