Polycom ATX 200 Integrator Manual page 68

Polycom ATX Integrator's Guide
Number of
Codecs in
the Call Scenario
1 Call stand-
alone video
confer-
encing
system
4 Multipoint
call
(Continuous
Presence)
4 Multipoint
call (VARS)
5 - 14
Preset
Num- Camera-1
ber (B1) View
97 Points towards
Seats 3
through 6 and
a portion of
seats 2 and 7.
96 Seats 3 and 4
99 Seats 3 and 4
To prepare for the camera alignment in an ATX 400 room:
Click the Display tab in the Telepresence Tool application.
1
If the displays are not showing the video from the cameras:
2
— For ATX SDK version 3.0.3, press the button preconfigured to show
the display.
— For ATX 300 version 3.0.3, access the Admin screen on the Polycom
Touch Control or on the Crestron Touch Panel, and then press Show
Display.
Click Camera Alignment.
3
Yellow, blue, and red lines appear on all display screens. You will use the
yellow and blue lines, but not the red lines, for the ATX system.
Camera-2 Camera-3
(B2) View (B3) View
Points towards Points towards
Seats 5 and 6. Seats 1 and 2.
Note, Note,
however, that however, that
the codec for the codec for
this camera is this camera is
not connected not connected
to the far site, to the far site,
therefore no therefore no
video is sent video is sent
and the near and the near
site display site display
remains black. remains black.
Seats 5 and 6 Seats 1 and 2
Seats 5 and 6 Seats 1 and 2
Camera-4
(B4) View
Points towards
Seats 7 and 8.
Note,
however, that
the codec for
this camera is
not connected
to the far site,
therefore no
video is sent
and the near
site display
remains black.
Seats 7 and 8
Seats 7 and 8
Polycom, Inc.