Table of Contents
Advertisement
Polycom ATX Integrator's Guide
Number of
Codecs in
the Call
3
2
1
3
3
5 - 10
The following table shows how the cameras are positioned differently for
different call scenarios. It also indicates how many codecs are in the call.
Preset
Num-
Scenario
ber
Call ATX
99
300, RPX
400 Series,
OTX 300, or
TPX 306M
system
Call RPX
98
HD 200
Series or
TPX 204M
system
Call stand-
97
alone video
confer-
encing
system
Multipoint
96
call
(Continuous
Presence)
Multipoint
99
call (VARS)
Camera-1
Camera-2
(B1) View
(B2) View
Seats 3 and 4
Seats 5 and 6
Seats 2
Points towards
through 5 and
Seats 5 and 6.
a portion of
Note,
seats 1 and 6
however, that
the camera is
disabled and
will not send
video.
Seats 2
Points towards
through 5 and
Seats 5 and 6.
a portion of
Note,
seats 1 and 6
however, that
the codec for
this camera is
not connected
to the far site,
therefore no
video is sent
and the near
site display
remains black.
Seats 2
Seats 2
through 5 and
through 5 and
a portion of
a portion of
seats 1 and 6
seats 1 and 6
(Note that only one of these three camera views will
be seen at each of the far sites.)
Seats 3 and 4
Seats 5 and 6
Camera-3
(B3) View
Seats 1 and 2
Points towards
Seats 1 and 2.
Note, however,
that the codec
for this camera
is not connected
to the far site,
therefore no
video is sent
and the near
site display
remains black.
Points towards
Seats 1 and 2.
Note, however,
that the codec
for this camera
is not connected
to the far site,
therefore no
video is sent
and the near
site display
remains black.
Seats 2 through
5 and a portion
of seats 1 and 6
Seats 1 and 2
Polycom, Inc.
Advertisement
Table of Contents
