Polycom ATX 200 Integrator Manual page 67

Number of
Codecs in
the Call Scenario
4 Call ATX
400 or RPX
HD 400
Series
system
3 Call ATX
300, OTX
300, or TPX
306M
system
2 Call RPX
200 Series,
TPX 204M,
or ATX 200
system
Polycom, Inc.
As described in Chapter 2,
where a conference participant is seated affects where and how they appear on the
displays at the far site. To ensure that the conference participants appear on the
displays, but do not appear on more than one display, you should place the chairs
at the proper locations at the table and mark those locations.
The following table shows how the cameras are positioned differently for
different call scenarios. It also indicates how many codecs are in the call.
Preset
Num- Camera-1
ber (B1) View
99 Seats 3 and 4
95 Seats 1
through 4
94 Seats 1
through 4
Configuring the Displays, Cameras, and Audio
"Installing the Displays, Table, Cameras, and Chairs,"
Camera-2 Camera-3
(B2) View (B3) View
Seats 5 and 6 Seats 1 and 2
Seats 5 Points towards
through 8 Seats 1 and 2.
Note,
however, that
the camera is
disabled and
will not send
video.
Seats 5 Points towards
through 8 Seats 1 and 2.
Note,
however, that
the codec for
this camera is
not connected
to the far site,
therefore no
video is sent
and the near
site display
remains black.
Camera-4
(B4) View
Seats 7 and 8
Points towards
Seats 7 and 8.
Note,
however, that
the codec for
this camera is
not connected
to the far site,
therefore no
video is sent
and the near
site display
remains black.
Points towards
Seats 7 and 8.
Note,
however, that
the codec for
this camera is
not connected
to the far site,
therefore no
video is sent
and the near
site display
remains black.
5 - 13