Figure 4-4 Atx 300 Telepresence Tool Main Screen (Before Connection) - Polycom ATX 200 Integrator Manual

Polycom, Inc.
In the API Port field, the default is 24. However, if you have a NAT, it
c
may map the API port to a different port. If so, enter the number of the
mapped port in the API Port field.
In the HTTP Port field, the default is 80. However, if you have a NAT,
d
it may map the HTTP port to a different port. If so, enter the number
of the mapped port in the HTTP Port field.
Click Connect All.
3
Figure 4-4 ATX 300 Telepresence Tool Main Screen (Before Connection)
When the codecs are connected, click Configure All HDXs to run the
4
configuration script on the codecs.
The config script will save the Secondary codecs' passwords on the
Primary codec.
If a codec fails to connect, you may have forgotten to remove the password for that
codec (the default password is the serial number of the codec). If you need to
remove the password, use the Polycom HDX web UI.
Configuring the Polycom ATX System
4 - 9