Siemens SIMATIC NET SINAUT ST7 System Manual page 88

Introduction to the SINAUT ST7 system
2.9 The SINAUT ST7 standard software package
Figure 2-23 Module manager for SINAUT ST7
The WAN manager for SINAUT ST7
The SINAUT WAN manager expands the catalog for the STEP 7
configuration tool. The SINAUT networks have been added to the
can select the SINAUT networks you require from this directory and install them in the STEP
7 network window.
The TIM modules are interconnected with the networks in the STEP 7 network window using
the mouse. Errors in the interconnections are rejected immediately.
A properties dialog can be opened in which you can specify the generally valid parameters
for a network, for example, ST1 or ST7 protocol, transmission speed etc.
In a further dialog, you can specify individual properties for the network nodes, when
connecting to a telephone network, for example, the telephone number.
88
NetPro
Subnets
SINAUT ST7 Station control system - System Manual
System Manual, 05/2007, C79000-G8976-C178-06
network
directory. You