Table of Contents
Advertisement
Figure 5-26
When the TIM 32 ships, all DIL switches are in the OFF position. This corresponds to the
following basic setting:
● Transmit level -6 dB
● 4-wire mode
● Channel 1 ON (fixed setting for 4-wire mode)
● Baud rate 1200 bps
● Normal operating mode
● Message consists of 11-bit asynchronous characters
● Control output switched with RTS (only relevant for wireless connection)
The following table contains more information on configuring these default settings
individually.
Table 5-17
Setting on
DIL switch
SINAUT ST7 Station control system - System Manual
System Manual, 05/2007, C79000-G8976-C178-06
5.4 Options for attachment and settings of the TIM 3 and TIM 4 variants
Possible DIL switch settings for the integrated MD2 modem
Settings on the 5-pin DIL switch of the TIM 32
Meaning
Transmit level -6 dB / -15 dB
For more detailed information, refer to the description of the 10-pin DIL
switch at switch 10.
Installing and putting a TIM into operation
179
Advertisement
Table of Contents
