Siemens SIMATIC NET SINAUT ST7 System Manual page 27

TIM 3V-IE Advanced
Permitted ambient conditions
•
•
•
Construction
•
•
•
Degree of protection
Configuration
•
•
•
TIM can be operated in the role
•
•
•
No. of TIM 3V-IE Advanced modules per S7-300
Local communication
•
•
•
•
Work memory required on the S7 CPU
•
•
Message memory on TIM
•
•
Transmission protocols (RS-232)
Selectable protocols
SINAUT ST7 Station control system - System Manual
System Manual, 05/2007, C79000-G8976-C178-06
Operating temperature
Transport/storage temperature
Relative humidity
Module format
Dimensions (W x H x D) in mm
Weight
Software for PG
Software for CPU (optional)
Storage of TIM configuration data
Station
Node station
Master station
Over backplane bus with the S7-300-CPU
Over backplane bus with other TIMs in the
rack
Over MPI port of the S7-300-CPU
CPUs, TIMs, and/or PCs
Over Ethernet port with CPUs, PCs and other
TIMs
SINAUT TD7 on CPU (TD7onCPU)
SINAUT TD7 on TIM (TD7onTIM)
Number of messages
Buffered
Introduction to the SINAUT ST7 system
2.3 SINAUT TIM communication modules
0 °C through +60 °C
•
-40 °C through +70 °C
•
Max. 95 % at +25 °C
•
Compact module for S7-300, single width
•
40 x 125 x 120
•
Approx. 250 g
•
IP 20
SINAUT ST7 configuration software
•
for PG
SINAUT TD7 block library for CPU
•
- on TIM-internal flash memory;
•
- on MMC of the S7-300-CPU
Yes
•
Yes
•
Yes
•
several: Number depends on the communication
resources of the S7-300 CPU
Possible over TD7onCPU and
•
TD7onTIM
Possible
•
with other Possible over TD7onCPU (for S7-300 and
1)
•
S7-400) and S7 communication (for
ST7cc/ST7sc and TIMs)
Possible over TD7onCPU (for S7-400) and S7
•
communication (for ST7cc/ST7sc and TIMs)
At least 20 KB; actual requirements depend
•
on the amounts of data and range of functions
Best case, 0 bytes
•
32,000 messages
•
No
•
SINAUT ST7
•
SINAUT ST1
•
27