Table of Contents
Advertisement
Introduction to the SINAUT ST7 system
2.3 SINAUT TIM communication modules
TIM 4V / TIM 4VD
Asynchronous character format
•
•
•
•
Hamming distance d
•
•
The use of TD7onCPU over backplane bus is possible with the following CPU types:
1)
All variants of the CPU 313C, CPU 314 and CPU 314C;
the CPU 315-2 DP and the CPU 315F-2 DP;
all variants of the C7 devices C7-633, C7-635 and C7-636
The MPI ports of the S7-300-CPU can be used with the following CPU types:
2)
All variants of the CPU 312, CPU 312C, CPU 314 and CPU 314C;
the CPU 315-2 DP and the CPU 315F-2 DP
Technical specifications of the TIM 4R / 4RD
TIM 4R / TIM 4RD
General
Transmission rate
Interfaces
•
•
•
•
•
Power supply
Current consumption
•
•
Power loss
Permitted ambient conditions
•
•
•
56
SINAUT ST7 protocol,
polling or spontaneous
SINAUT ST7 protocol,
multi-master polling
SINAUT ST1 protocol, polling
SINAUT ST1 protocol, spontaneous
SINAUT ST7 protocol
SINAUT ST1 protocol
Connection to external data transmission
device
2. Connection to external data transmission
device
MPI bus
DCF77 antenna (TIM 4RD)
Connection to power supply
From backplane bus
From 24 V DC
Operating temperature
Transport/storage temperature
Relative humidity
10 or 11 bits
•
10 bits
•
11 bits
•
10 or 11 bits
•
4
•
4
•
50 to 38,400 bps
9-pin D-sub male connector, RS-232 can be
•
switched to RS485
RJ-45, RS-232 can be switched over to RS-
•
485 (the supplied interface adapter cable
provides a further 9-pin D-sub male
connector)
9-pin D-sub female connector
•
BNC socket (over supplied DCF77 adapter
•
cable)
4-pin terminal strip
•
24 V DC; min. 20.4 V; max. 28.8 V
60 mA (only when the TIM is used as a CP in
•
an S7-300 rack)
500 mA
•
12.3 W
0 °C through +60 °C
•
-40 °C through +70 °C
•
Max. 95 % at +25 °C
•
SINAUT ST7 Station control system - System Manual
System Manual, 05/2007, C79000-G8976-C178-06
Advertisement
Table of Contents
