Table of Contents
Advertisement
Introduction to the SINAUT ST7 system
2.3 SINAUT TIM communication modules
Technical specifications of the TIM 44 / 44D
TIM 44 / TIM 44D
General
Interfaces
•
•
•
•
•
Transmission rate over the RS-232/RS-485
interface
Power supply
Current consumption
•
•
Power loss
Permitted ambient conditions
•
•
•
Construction
•
•
•
Degree of protection
Configuration
•
•
•
TIM can be operated in the role
•
•
•
Number of TIM 44/44D modules per S7-CPU or
PC
Local communication in the rack of an S7-300
•
•
•
52
Attachment to ISDN network
Connection to external data transmission
device
MPI bus
DCF77 antenna (TIM 44D)
Connection to power supply
From backplane bus
From 24 V DC
Operating temperature
Transport/storage temperature
Relative humidity
Module format
Dimensions (W x H x D) in mm
Weight
Software for PG
Software for CPU (optional)
Storage of TIM configuration data
Station
Node station
Master station
Over backplane bus with the S7-300-CPU
Over backplane bus with other TIMs in the
rack
Over MPI port of the S7-300-CPU
CPUs, TIMs, and/or PCs
RJ-12
•
9-pin D-sub male connector, RS-232 can be
•
switched to RS-485
9-pin D-sub female connector
•
BNC socket (over supplied DCF77 adapter
•
cable)
4-pin terminal strip
•
50 to 38,400 bps
24 V DC; min. 20.4 V; max. 28.8 V
60 mA (only when the TIM is used as a CP in
•
an S7-300 rack)
500 mA
•
12.3 W
0 °C through +60 °C
•
-40 °C through +70 °C
•
Max. 95 % at +25 °C
•
Compact module for S7-300, double width
•
80 x 125 x 120
•
Approx. 300 g
•
IP 20
SINAUT ST7 configuration software
•
for PG
SINAUT TD7 block library for CPU
•
on internal TIM flash memory
•
Yes
•
Yes
•
Yes
•
Several, number depends on the communication
resources of the S7-CPU or of the PC
Possible using TD7onCPU
•
Possible
•
with other
Possible over TD7onCPU (for S7-300 and
2)
•
S7-400) and S7 communication (for
ST7cc/ST7sc and TIMs)
SINAUT ST7 Station control system - System Manual
System Manual, 05/2007, C79000-G8976-C178-06
1)
Advertisement
Table of Contents
