Siemens SIMATIC NET SINAUT ST7 System Manual page 55

TIM 4V / TIM 4VD
Construction
•
•
•
Degree of protection
Configuration
•
•
•
TIM can be operated in the role
•
•
•
Number of TIM 4V/4VD modules per S7-CPU or
PC
Local communication in the rack of an S7-300
•
•
•
Local communication in standalone mode
•
Work memory required on the S7 CPU
Message memory on TIM
•
•
Transmission protocols
Selectable protocols
Mode with dedicated line/wireless network
•
•
Mode in dial-up network
•
•
SINAUT ST7 Station control system - System Manual
System Manual, 05/2007, C79000-G8976-C178-06
Module format
Dimensions (W x H x D) in mm
Weight
Software for PG
Software for CPU (optional)
Storage of TIM configuration data
Station
Node station
Master station
Over backplane bus with the S7-300-CPU
Over backplane bus with other TIMs in the
rack
Over MPI port of the S7-300-CPU
CPUs, TIMs, and/or PCs
Over MPI port of the CPU with CPUs, other
TIMs and/or PCs
Number of messages
Buffered
SINAUT ST7 protocol
SINAUT ST1 protocol
SINAUT ST7 protocol
SINAUT ST1 protocol
Introduction to the SINAUT ST7 system
2.3 SINAUT TIM communication modules
Compact module for S7-300, double width
•
80 x 125 x 120
•
Approx. 300 g
•
IP 20
SINAUT ST7 configuration software
•
for PG
SINAUT TD7 block library for CPU
•
on internal TIM flash memory
•
Yes
•
No
•
Yes
•
Several, number depends on the communication
resources of the S7-CPU or of the PC
Possible using TD7onCPU
•
Possible
•
with other Possible over TD7onCPU (for S7-300 and
2) •
S7-400) and S7 communication (for
ST7cc/ST7sc and TIMs)
Possible over TD7onCPU (for S7-300 and
•
S7-400) and S7 communication (for
ST7cc/ST7sc and TIMs)
At least 20 KB; actual requirements depend on
the amounts of data and range of functions
Approx. 10,000 messages
•
No
•
SINAUT ST7
•
SINAUT ST1
•
- Polling
•
- Polling with time slots
- Multi-master polling with
time slots
- Polling
•
- Polling with time slots
Spontaneous
•
Spontaneous
•
1)
55