Table of Contents
Advertisement
Installing and putting a SINAUT modem into operation
6.8 Installing and putting a SINAUT MD2, MD3, MD4 modem into operation
6.8.2
Installation on a 35 mm standard rail
To install the modem on a 35 mm standard rail, the 6NH7760-0AA adapter is required (must
be ordered separately).
Figure 6-54
Fit the modem onto the adapter in the same way as the modem is fitted to an S7-300 rail.
Screw the modem to the adapter. The modem is now prepared for installation on a standard
rail and can be clipped onto it.
The remaining steps in installation are analogous to installation on an S7-300 rail.
6.8.3
Horizontal and vertical installation
Horizontal and vertical installation
A SINAUT modem can be operated both in a horizontal and in a vertical installation.
Permitted ambient temperature
The SINAUT modems can be operated in the same temperature range specified for the S7-
300.
312
Adapter for installation on a 35 mm standard rail
SINAUT ST7 Station control system - System Manual
System Manual, 05/2007, C79000-G8976-C178-06
Advertisement
Table of Contents
