Table of Contents
Advertisement
Introduction to the SINAUT ST7 system
2.8 Connecting cables
Order no.
Description
6NH1701-7AN
Cable for connecting a TIM 11 (RS-232) with one of the SINAUT ST7
MD2, MD3 or MD4 modems (RS-232).
Cable length 2.5 m
6NH1701-7BK
Cable for connecting a TIM011B (RS-232) with one of the SINAUT ST7
MD2, MD3 or MD4 modems (RS-232).
Cable length 1.0 m.
2.8.2
WAN connecting cables
A 6NH7700-xxx connecting cable is supplied with every TIM module that has an integrated
MD modem and with every MD modem itself. This allows attachment of the MD modem
integrated in the TIM and the separate modems to a WAN.
The connecting cables are also available as spares under the number shown.
Table 2-7
WAN connecting cables
Order no.
6NH7700-2AR60
6NH7700-3BR60
6NH7700-4AR60
84
Description
Connecting cable with 2 x RJ-12 plugs for connection to an
MD2 modem (RJ-12) with an LTOP overvoltage protection
module (RJ-12). The cable is also suitable for an MD2
integrated in a TIM.
Cable length 6 m
Connecting cable with 2 x RJ-12 Western plug and snap-
on TAE6N plug to connect an MD3 modem (RJ-12) to a
telephone jack (TAE6N) or an LTOP overvoltage protection
module (RJ-12) if the MD3 modem is being operated as a
dedicated line modem.
Cable length 6 m
Connecting cable with RJ-12 and RJ-45 plug to connect an
MD4 modem (RJ-12) with an ISDN-S
cable is also suitable for an MD4 integrated in a TIM.
Cable length 6 m
Illustration
Illustration
jack (RJ-45). The
0
SINAUT ST7 Station control system - System Manual
System Manual, 05/2007, C79000-G8976-C178-06
Advertisement
Table of Contents
