5.2.2
Front view of the TIM 4R-IE with removed front panel
Figure 5-9
On the rear of the housing, there is an opening for the optional C-PLUG. The configuration
data of the TIM 4R-IE can be stored on the C-PLUG. If service is required, a standalone TIM
can be replaced without needing a PG.
5.2.3
LEDs of the TIM 4R-IE
The following table summarizes the meaning of the LEDs during normal operation. The
display during startup is explained in the section "Startup activities of the TIM 4R-IE
(Page 223)".
SINAUT ST7 Station control system - System Manual
System Manual, 05/2007, C79000-G8976-C178-06
s
L+
M
Front view of the TIM 4R-IE with removed front panel
Installing and putting a TIM into operation
5.2 Design of the TIM 4R-IE
161