Table of Contents
Advertisement
Figure 2-1
2.3.3
Design of the TIM 3V-IE variants
The TIM 3V-IE variants have all the advantages of the SIMATIC S7-300 system design:
● Compact design; single standard width of the SM modules of the SIMATIC S7-300
● 9-pin D-sub male connector with an RS-232 interface for connecting a modem
● RJ-45 jack for connection to Ethernet; industrial design with additional collar for inserting
● 2-pin plug-in terminal block for connecting the external supply voltage of 24 V DC
● Front LEDs for display of Ethernet and WAN communication
● Easy to mount; the TIM is mounted on the S7-300 rail and connected to adjacent
● Can be operated in an expansion rack (ER) in conjunction with the IM 360/361. This
● Can be operated without a fan
● A backup battery or memory module are not required
The following figure shows the ports of the TIM 3V-IE or TIM 3V-IE Advanced (schematic
representation with covers removed).
SINAUT ST7 Station control system - System Manual
System Manual, 05/2007, C79000-G8976-C178-06
SINAUT TIM 3V-IE communications module
the IE FC RJ-45 Plug 180
modules by means of the bus module connectors. No slot rules apply.
allows the TIM to be combined with a C7 control system, with the newer C7 control
systems it can also be combined using the supplied I/O expansion cable.
Introduction to the SINAUT ST7 system
2.3 SINAUT TIM communication modules
23
Advertisement
Table of Contents
