Possible Attachments And Settings For The Tim 4R And Tim 4Rd - Siemens SIMATIC NET SINAUT ST7 System Manual

5.4.8

Possible attachments and settings for the TIM 4R and TIM 4RD

Figure 5-40
Pinout of the X3 RJ-45 Western jack for the RS-232/RS-485 port
The X3 connector of the combined RS-232/RS-485 port is designed as an 8-pin RJ-45
Western jack. The pinout is shown in the following table.
SINAUT ST7 Station control system - System Manual
System Manual, 05/2007, C79000-G8976-C178-06
5.4 Options for attachment and settings of the TIM 3 and TIM 4 variants
s
S F 1
T X D 2
R X D 3
M P I / K 4
T I M - B U S 5
D C F 7 7 6
X3
M
L+
DC
24V
M
Possible attachment and settings for the TIM 4R or TIM 4RD
Installing and putting a TIM into operation
X1
X2
207