Siemens SIMATIC NET SINAUT ST7 System Manual page 193

Standard
Figure 5-29
Note
Always leave reserved DIL switches set to the default position as shipped. See also DIL
switch setting as shipped.
Setting the metering pulse filter
The metering pulse filter can be set
● to 12 kHz or
● to 16 kHz
Table 5-29
Metering pulse filter
16 kHz
(for example for Germany or Switzerland)
12 kHz
(for example for Austria)
SINAUT ST7 Station control system - System Manual
System Manual, 05/2007, C79000-G8976-C178-06
5.4 Options for attachment and settings of the TIM 3 and TIM 4 variants
- 1
profile for dial-up network
OFF OFF OFF OFF
AT- mode
Possible settings with the DIL switches accessible from above
Setting the metering pulse filter
Installing and putting a TIM into operation
2 3 4
Setting on DIL switch
193