Introduction to the SINAUT ST7 system
2.3 SINAUT TIM communication modules
TIM 3V-IE
Asynchronous character format
•
•
•
•
Hamming distance d
•
•
Ethernet
Protocol
Communication services
Number of connections
•
•
•
The MPI ports of the S7-300-CPU can be used with the following CPU types:
1)
All variants of the CPU 312, CPU 312C, CPU 314 and CPU 314C;
the CPU 315-2 DP and the CPU 315F-2 DP
Technical specifications of the TIM 3V-IE Advanced
TIM 3V-IE Advanced
General
Transmission rate
•
•
Interfaces
•
•
Cable length
•
•
•
Power supply
Current consumption
•
•
Power loss
26
SINAUT ST7 protocol,
polling or spontaneous
SINAUT ST7 protocol,
multi-master polling
SINAUT ST1 protocol, polling
SINAUT ST1 protocol, spontaneous
SINAUT ST7 protocol
SINAUT ST1 protocol
S7 communication
PG communication
Total number of operable connections
RS-232
Ethernet
Communication connector,
electrical
Connector for power supply
RS-232
RS-485
RJ-45
From backplane bus
From 24 V DC
10 or 11 bits
•
10 bits
•
11 bits
•
10 or 11 bits
•
4
•
4
•
TCP/IP transport protocol
SINAUT ST7 using S7 communication
•
PG communication
•
max. 8
•
max. 4
•
max. 12
•
50 to 38,400 bps
•
10/100 Mbps autosensing
•
- 9-pin D-sub male, RS-232;
•
- RJ-45 (10/100 Mbps; TP)
2-pin plug-in terminal strip
•
max. 6 m
•
max. 30 m
•
max. 10 m
•
24 V DC; min. 20.4 V; max. 28.8 V
200 mA
•
typically 160 mA, max. 200 mA
•
5.8 W
SINAUT ST7 Station control system - System Manual
System Manual, 05/2007, C79000-G8976-C178-06