Installing The Optional Expanding Memory - Kyocera FS-1920 Service Manual

2FP/2FY/2FR

1-3-2 Installing the optional expanding memory

The main board of the printer is equipped with one socket for memory expansion. Expansion memory is available in the form
of DIMM (Dual In-line Memory Module).
CAUTION
Take precautions that no foreign substances such as metal
chips or liquid get inside the printer during the installation
process. Operation of the printer during the presence of a
foreign substance may lead to fire or electric shock.
WARNING
Turn the printer's power switch off. Unplug the printer's
power cable.
Procedure
1. Remove the two screws and then pull the main board
all the way out of the printer.
There are two DIMM sockets are provided on the FS-
3830N model, and one DIMM socket on the FS-1920/
3820N models for expanding the printer's memory.
(The extra 32 MB of DIMM memory that come
standard with the FS-3830N model is installed in one
of the expanding DIMM sockets.)
Memory card
1-3-8
Memory card slot
One DIMM socket
FS-3820N model
Figure 1-3-12 Removing the main board
Standard 32 MB
DIMM memory installed
Two DIMM sockets
FS-3830N model
One DIMM socket
FS-1920 model
Screw
Screw