Table of Contents
Advertisement
MITSUBISHI CNC
2 General Specifications
2.11 Optical Communication Repeater Unit (FCU7-EX022)
When the distance of the optical communication cable between NC control unit and drive unit is over 30m, the
communication can be performed by relaying the optical signal.
Using up to two units, relay of the total length of up to 90m can be performed.
<Product features>
(a) When the distance of the optical communication cable between NC control unit and drive unit is over 30m, the
communication can be performed by relaying the optical signal.
(b) If the distance between NC control unit and drive unit is even within 30m, the cable can be divided by the relay in
transporting the machine.
(c)
Same mounting dimension as the remote I/O unit (DX unit).
CAUTION
This unit cannot be used between drive units.
Dimension and Names of parts
5
OPT1IN
OPT1OUT
OPT2IN
OPT2OUT
FUSE
DCOUT
FG
DCIN
ACFAIL
70
135
40
2-M5-0.8 screw
34
6
Advertisement
Table of Contents
