Appendix 1.41 Sh41 Cable - Mitsubishi Electric M70V Series Connection Manual

Appendix 1.41 SH41 Cable

Max. cable length: 1m (the maximum length of the cable when connected to the control unit via other units)
Application: Remote I/O cable
between remote I/O,
remote I/O-CNC control unit,
remote I/O-Operation panel I/O unit,
remote I/O-MITSUBISHI CNC machine operation panel A
(between remote I/O units in a panel)
[RIO1, RIO2, RIO3]
Connector: 1-178288-3
Contact: 1-175218-2 × 3
Recommended manufacturer:
Tyco Electronics
(Note 1) Protect both ends of the cable with insulated bushing.
(Note 2) RIO1 and RIO3 can be used commonly.
(Note 3) Use this cable for short applications, such as bridging the remote I/O units in the same panel. Normally
use the FCUA-R211 cable with high noise withstand level.
RIO1,RIO3(CSH41)
RIO1,RIO3(CSH41)
TXRX 1
TXRX* 2
0V 3
Wire material:
2
MVVS 3C × 0.5mm (MIC 3C × 0.5mm
Recommended manufacturer: Takeuchi Densen
M70V Series Connection Manual
Appendix 1.41 SH41 Cable
(CSH41)
(CSH41)
1 TXRX
2 TXRX*
3 0V
Connector: 1-178288-3
Contact: 1-175218-2 × 3
2
)
Recommended manufacturer:
Tyco Electronics
193